- Dehkora Road, Vill. Rohad, Distt. Jhajjar, Bahadurgarh, Haryana - 124 501, INDIA
- +91-9354669252
info@jindalmetal.com
| COLD ROLLING STAINLESS STEEL GRADES | 200, 300 & 400 Series |
|---|---|
| STAINLESS STEEL STANDARDS APPLICABLE | ASTM, EN -10088, JIS, IS 6911, JSL Standard |
| PRODUCTION CAPACITY | 22000 TPA |
| THICKNESS RANGE | 0.030 mm to 1.5 mm |
| WIDTH RANGE | 3.5 mm to 630 mm |
| STRIP TEMPER | Annealed,1/16 Hard ,¼ Hard, ½ Hard, ¾ Hard, Full Hard, Extra Hard |
| SURFACE FINISH | 2D & 2B Finish, BA Finish / 2R, As Rolled Finish / 2H |
| EDGE CONDITION | Slit Edge, Mill Edge, Deburred Edge, Round Edge |
| COIL INTERNAL DIAMETER | 150 mm, 250 mm, 408 mm & 508 mm ( It is product specific must be checked before order ) |
Specifications of Cold Rolled Strips
Thickness 0.10 mm to 3.5 mm
Width 10 mm to 425 mm
Hardness Full Annealed / Full Hard/ Half hard/ Quarter Hard
Surface Finish Bright
Edge Condition Slit Edge
Grades SAE 1050 / SAE 1055 / C 55 / SAE 1060/ C 62 / SAE 1065/ SAE 1070
SAE 1075/ SAE 1080/ C 80 / SAE 1090/ SAE 1095/ C125 / 50CrV4 / 75Cr1 / 75Ni8
Specifications of Hardened & Tempered Steel Strips
Thickness 0.20 mm to 3.5 mm
Width 20 mm to 415 mm
Hardness 38 -55 HRC
Surface Finish Bright / Bronze / Blue / Grey
Edge Condition 1ER/2ER / Slit Edge/ Round Edge / Square Edge/ Chamfered Edge
Grades SAE 1055 / C 55 / SAE 1060/ C 62 / SAE 1065/ SAE 1070 / SAE 1075/ SAE 1080 / C 80
SAE 1090/ SAE 1095/ C125 / 50CrV4 / 75Cr1 / 75Ni8
H&T Division